3. AutoDesign

• 3.1. Three-Ball Contact Tutorial (AutoDesign)
  • 3.1.1. Outline of Tutorial Sample A
  • 3.1.2. Three-Ball Contact Problem
  • 3.1.3. Model Definition
  • 3.1.4. Design Parameter Definition
  • 3.1.5. Analysis Response Definition
  • 3.1.6. Design Study
    • 3.1.6.1. Basic Procedure for Design Study
    • 3.1.6.2. Effect Analysis
    • 3.1.6.3. Screening Variables
    • 3.1.6.4. Correlation Analysis
  • 3.1.7. Design Optimization
    • 3.1.7.1. Let’s remind the following design problem:
• 3.2. Catapult System Tutorial (AutoDesign)
  • 3.2.1. Outline of Tutorial Sample B
  • 3.2.2. Catapult System Design Problem
  • 3.2.3. Loading the Model and Viewing the Animation
    • 3.2.3.1. To load the base model and view the animation:
  • 3.2.4. Design Variables
    • 3.2.4.1. Exercising the Model
      • 3.2.4.1.1. To exercise the model:
    • 3.2.4.2. Defining the Design Variables
      • 3.2.4.2.1. To create a design parameter:
  • 3.2.5. Defining the Performance Indexes
    • 3.2.5.1. To create an analysis response:
  • 3.2.6. Design Optimization
    • 3.2.6.1. Objectives and Constraints
    • 3.2.6.2. AutoDesign’s Design Optimization Process
    • 3.2.6.3. Running a Design Optimization
      • 3.2.6.3.1. To run a design optimization:
  • 3.2.7. Animating the Optimized Model
    • 3.2.7.1. To update the model with the optimized design variables:
    • 3.2.7.2. To reset the model for the next optimizations:
• 3.3. Paper Distributing System Tutorial (AutoDesign)
  • 3.3.1. Outline of Tutorial Sample C
  • 3.3.2. Paper Distributing System Problem
  • 3.3.3. Loading the Model and Viewing the Animation
    • 3.3.3.1. To load the base model and view the animation:
  • 3.3.4. Design Variables
    • 3.3.4.1. Defining the Design Variables
      • 3.3.4.1.1. To create a design parameter:
  • 3.3.5. Defining the Performance Indexes
    • 3.3.5.1. To create an analysis response:
  • 3.3.6. Running a Robust Design Optimization
    • 3.3.6.1. To run a robust design optimization:
  • 3.3.7. Running a 6-Sigma Design Optimization
    • 3.3.7.1. To run a robust design optimization:
• 3.4. Suspension System Tutorial (AutoDesign)
  • 3.4.1. Outline of Tutorial Sample D
  • 3.4.2. Suspension System Design Problem
  • 3.4.3. Loading the Model and Viewing the Yaw & Roll ranges
    • 3.4.3.1. To load the base model and view the animation:
  • 3.4.4. Defining the design variables
  • 3.4.5. Defining the performance index
  • 3.4.6. Running a Design Optimization
    • 3.4.6.1. Let’s start to solve the multi-objective optimization problem:
  • 3.4.7. Design Optimization with Screening Variables
• 3.5. Paper Feeding System Tutorial (AutoDesign)
  • 3.5.1. Outline of Tutorial Sample E
  • 3.5.2. Paper Feeding System Design Problem
  • 3.5.3. Loading the Model and Viewing MTT2D Model
    • 3.5.3.1. To load the base model and view the animation:
  • 3.5.4. Defining the Design Variables
  • 3.5.5. Defining the Analysis Response
  • 3.5.6. Running a Design Optimization Problem
    • 3.5.6.1. The optimization problem is defined as:
  • 3.5.7. Comparison of Analysis Results
• 3.6. Landing Gear System Tutorial (AutoDesign)
  • 3.6.1. Landing Gear System Design Problem
  • 3.6.2. Loading the Model and Playing a Control System
    • 3.6.2.1. To load the base model and view the animation:
  • 3.6.3. Defining the design variables
  • 3.6.4. Defining the Analysis Responses
  • 3.6.5. Running a Design Optimization
  • 3.6.6. Comparison of analysis results
• 3.7. Connecting Rod Shape Optimization Tutorial (AutoDesign)
  • 3.7.1. Connecting Rod Shape Optimization
  • 3.7.2. Loading and simulation the model
  • 3.7.3. Defining the design variables and setting
  • 3.7.4. Defining the analysis responses
  • 3.7.5. Running a design optimization
  • 3.7.6. Comparison of analysis results