10. SPI

• 10.1. Water Sloshing (Particleworks)
  • 10.1.1. Getting Started
    • 10.1.1.1. Objective
    • 10.1.1.2. Prerequisites
    • 10.1.1.3. Procedures
  • 10.1.2. Register Particleworks GUI in RecurDyn
    • 10.1.2.1. Task Objective
    • 10.1.2.2. Estimated Time to Complete
    • 10.1.2.3. Copy Configuration XML
      • 10.1.2.3.1. To copy Particleworks.xml:
      • 10.1.2.3.2. To paste XML in RecurDyn:
      • 10.1.2.3.3. To confirm RecurDyn GUI:
      • 10.1.2.3.4. To check a path of particle solver DLL:
  • 10.1.3. Creating a Model in RecurDyn
    • 10.1.3.1. Task Objective
    • 10.1.3.2. Estimated Time to Complete
    • 10.1.3.3. Starting RecurDyn
      • 10.1.3.3.1. To start RecurDyn and create a new model:
      • 10.1.3.3.2. To save the model
    • 10.1.3.4. Creating the Geometry
    • 10.1.3.5. Creating the Translational Joint
    • 10.1.3.6. Creating the Wall
    • 10.1.3.7. Exporting the *.wall
    • 10.1.3.8. Analyzing the RecurDyn Model
      • 10.1.3.8.1. Executing the Simulation Without Co-Simulation:
      • 10.1.3.8.2. To display an animation of the simulated motion:
  • 10.1.4. Creating a Model in Particleworks
    • 10.1.4.1. Task Objective
    • 10.1.4.2. Estimated Time to Complete
    • 10.1.4.3. Starting Particleworks
      • 10.1.4.3.1. To create a new model:
      • 10.1.4.3.2. Copy the RecurDyn files:
    • 10.1.4.4. Setting up the Pre-process
      • 10.1.4.4.1. To import the Wall from the Wall file:
      • 10.1.4.4.2. To set the transparency of a Wall:
      • 10.1.4.4.3. To set the domain:
      • 10.1.4.4.4. To create the particles:
      • 10.1.4.4.5. To create and set the physical properties of the fluid:
      • 10.1.4.4.6. To configure the particles and environment:
      • 10.1.4.4.7. To configure the analysis conditions:
      • 10.1.4.4.8. To create the particles:
    • 10.1.4.5. Preparing for Co-Simulation with RecurDyn
      • 10.1.4.5.1. Simulation in Particleworks Independent of RecurDyn:
  • 10.1.5. Co-Simulation
    • 10.1.5.1. Task Objective
    • 10.1.5.2. Estimated Time to Complete
    • 10.1.5.3. Co-Simulation
      • 10.1.5.3.1. To run co-simulation in RecurDyn:
      • 10.1.5.3.2. To view the progress of analysis:
    • 10.1.5.4. Working with Animations
      • 10.1.5.4.1. To play an animation:
      • 10.1.5.4.2. To display a particle contour:
    • 10.1.5.5. Working with Plots
      • 10.1.5.5.1. To view the driving torque:
  • 10.1.6. Particleworks Postprocessing
    • 10.1.6.1. Task Objective
    • 10.1.6.2. Estimated Time to Complete
    • 10.1.6.3. Working with Animations
      • 10.1.6.3.1. To play an animation:
      • 10.1.6.3.2. To create the probe:
    • 10.1.6.4. Creating the Surface
      • 10.1.6.4.1. To create the surface:
      • 10.1.6.4.2. To hide the particle animation:
  • 10.1.7. Result Analysis and Review
    • 10.1.7.1. Task Objective
    • 10.1.7.2. Estimated Time to Complete
    • 10.1.7.3. A Comparative Analysis of Results
      • 10.1.7.3.1. A comparative analysis of fluid behavior results:
      • 10.1.7.3.2. A comparative analysis of fluid pressure result:
• 10.2. Styler (Flex – Particleworks)
  • 10.2.1. Overview
    • 10.2.1.1. Task Objectives
    • 10.2.1.2. Prerequisites
    • 10.2.1.3. Procedures
  • 10.2.2. Register Particleworks GUI in RecurDyn
    • 10.2.2.1. Task Objective
    • 10.2.2.2. Estimated Time to Complete
    • 10.2.2.3. Copy Configuration XML
      • 10.2.2.3.1. To copy Particleworks.xml:
      • 10.2.2.3.2. To paste XML in RecurDyn:
      • 10.2.2.3.3. To confirm RecurDyn GUI:
      • 10.2.2.3.4. To check a path of particle solver DLL:
  • 10.2.3. Modifying a RecurDyn Model
    • 10.2.3.1. Task Objectives
    • 10.2.3.2. Estimated Time to Complete This Task
    • 10.2.3.3. Defining a patch set
    • 10.2.3.4. Creating walls
    • 10.2.3.5. Exporting a *.wall file
  • 10.2.4. Creating a Particleworks Model
    • 10.2.4.1. Task Objectives
    • 10.2.4.2. Estimated Time to Complete This Task
    • 10.2.4.3. Starting Particleworks
      • 10.2.4.3.1. Create a new model
      • 10.2.4.3.2. Copying a RecurDyn model and wall-related files
    • 10.2.4.4. Configuring a preprocess
      • 10.2.4.4.1. Import a wall file
      • 10.2.4.4.2. Set Wall_Outer_Tank.obj transparency
      • 10.2.4.4.3. Configure the camera
      • 10.2.4.4.4. Set a domain
      • 10.2.4.4.5. Create an inflow
      • 10.2.4.4.6. Create and configure physical properties
      • 10.2.4.4.7. Configure particles and preferences
      • 10.2.4.4.8. Configure analysis conditions
      • 10.2.4.4.9. Create particles
    • 10.2.4.5. Preparing for Co-simulation
  • 10.2.5. Co-simulation
    • 10.2.5.1. Task Objectives
    • 10.2.5.2. Estimated Time to Complete This Task
    • 10.2.5.3. Co-simulation
      • 10.2.5.3.1. Perform co-simulation in RecurDyn
  • 10.2.6. Checking the Analysis Results
    • 10.2.6.1. Task Objectives
    • 10.2.6.2. Estimated Time to Complete This Task
    • 10.2.6.3. Checking Contour
• 10.3. Cleated Belt Conveyor (EDEM)
  • 10.3.1. Overview
    • 10.3.1.1. Task Objectives
    • 10.3.1.2. Prerequisites
    • 10.3.1.3. Procedures
  • 10.3.2. Registering EDEM GUI on the RecurDyn Ribbon
    • 10.3.2.1. Task Objectives
    • 10.3.2.2. Estimated Time to Complete This Task
    • 10.3.2.3. Importing the Configuration XML File
      • 10.3.2.3.1. To copy the EDEMV1_1_0.xml file:
      • 10.3.2.3.2. To paste the file into the RecurDyn folder:
      • 10.3.2.3.3. To check the RecurDyn GUI:
      • 10.3.2.3.4. To check the path of Particle Solver DLL:
  • 10.3.3. Simulating and Analyzing the Initial Model
    • 10.3.3.1. Task Objectives
    • 10.3.3.2. Estimated Time to Complete This Task
    • 10.3.3.3. Opening the Model
      • 10.3.3.3.1. To copy the example model:
      • 10.3.3.3.2. To run RecurDyn and open the initial model:
      • 10.3.3.3.3. To analyze the model configuration:
    • 10.3.3.4. Performing Simulation
      • 10.3.3.4.1. To run the simulation:
      • 10.3.3.4.2. To view the result:
  • 10.3.4. Creating and Exporting a Wall
    • 10.3.4.1. Task Objectives
    • 10.3.4.2. Estimated Time to Complete This Task
    • 10.3.4.3. Creating walls
      • 10.3.4.3.1. To create PatchSet:
      • 10.3.4.3.2. To create walls:
    • 10.3.4.4. To export a *.wall file:
  • 10.3.5. Creating an EDEM Model
    • 10.3.5.1. Task Objectives
    • 10.3.5.2. Estimated Time to Complete This Task
    • 10.3.5.3. EDEM Creator
      • 10.3.5.3.1. To execute EDEM and set RecurDyn coupling:
      • 10.3.5.3.2. To create material:
      • 10.3.5.3.3. To modify the particle shape:
      • 10.3.5.3.4. To open the RecurDyn wall:
      • 10.3.5.3.5. To define the zones created by particles:
      • 10.3.5.3.6. To set gravity:
      • 10.3.5.3.7. To save the model:
    • 10.3.5.4. EDEM Simulator
      • 10.3.5.4.1. To set the simulator:
      • 10.3.5.4.2. To activate coupling:
  • 10.3.6. Co-simulation
    • 10.3.6.1. Task Objectives
    • 10.3.6.2. Estimated Time to Complete This Task
    • 10.3.6.3. Co-simulation
      • 10.3.6.3.1. To perform co-simulation in RecurDyn:
      • 10.3.6.3.2. To view the result:
    • 10.3.6.4. EDEM Analyst
      • 10.3.6.4.1. To set the simulator:
  • 10.3.7. Analyzing and Reviewing the Results
    • 10.3.7.1. Task Objectives
    • 10.3.7.2. Estimated Time to Complete This Task
    • 10.3.7.3. Post Process
      • 10.3.7.3.1. To create particle sensors: