21.2. User Guide for AutoDesign

• 21.2.1. Statement of Optimization
  • 21.2.1.1. Design Variables
  • 21.2.1.2. Design Constraints
  • 21.2.1.3. Design Objectives
  • 21.2.1.4. Design Optimization Formulation
  • 21.2.1.5. Statistical Analysis
  • 21.2.1.6. Robust Design Optimization Formulation
  • 21.2.1.7. 6-Sigma Constraint Formulation
  • 21.2.1.8. Meta-Model
• 21.2.2. Introduction of AutoDesign
  • 21.2.2.1. Design Parameters
  • 21.2.2.2. Analysis Responses
• 21.2.3. Tools of AutoDesign
  • 21.2.3.1. Design Parameters
    • 21.2.3.1.1. Step for definition
    • 21.2.3.1.2. Option of the definition design parameter
  • 21.2.3.2. Analysis Response
    • 21.2.3.2.1. Step for definition
    • 21.2.3.2.2. Option for the definition Analysis Response
    • 21.2.3.2.3. Analysis Response Treatment Option
  • 21.2.3.3. Design Study
    • 21.2.3.3.1. Run Step of Design Study
    • 21.2.3.3.2. Tools of analysis results of Design Study
  • 21.2.3.4. Design Optimization
    • 21.2.3.4.1. Run Step of Design Optimization
    • 21.2.3.4.2. Result Sheet of Design Optimization
    • 21.2.3.4.3. Summary Sheet of Design Optimization
  • 21.2.3.5. DFSS/Robust Design Optimization
    • 21.2.3.5.1. Run Step of DFSS/Robust Design Optimization
    • 21.2.3.5.2. Result Sheet of DFSS/Robust Design Optimization
    • 21.2.3.5.3. Summary Sheet of DFSS/Robust Design Optimization
  • 21.2.3.6. Reliability Analysis by using SAO method
    • 21.2.3.6.1. Run Steps of SAO based Reliability Analysis
    • 21.2.3.6.2. Result Sheet of Reliability Analysis: SAO
    • 21.2.3.6.3. Summary Sheet of Reliability Analysis: SAO
  • 21.2.3.7. Reliability Analysis by using Monte-Carlo Simulation
    • 21.2.3.7.1. Run Steps of Monte-Carlo Simulation
    • 21.2.3.7.2. Result Sheet of Monte-Carlo Simulation
    • 21.2.3.7.3. Summary Sheet of Monte-Carlo Simulation
  • 21.2.3.8. Simulation History
    • 21.2.3.8.1. Execute the simulation history
    • 21.2.3.8.2. Tools of Simulation History