10.13.2.1. ANSYS output

This informs the format of load data which is exported according to ANSYS export type.
The following is the OUTPUT of ANSYS and each component is described.
! LOAD CASE = 1
!
TIME, time
FDELE, ALL
ACEL, ACC_X, ACC_Y, ACC_Z
OMEGA, VEL_RX, VEL_RY, VEL_RZ
DOMEGA, ACC_RX, ACC_RY, ACC_RZ
F, NODE, Lab, VALUE
LSWRITE

  1. TIME, time: Sets the time for a load step.

    • TIME: Time at the end of the load step.

  2. FDELE, ALL: Deletes force loads on nodes.

    • NODE: Node for which force is to be deleted. If ALL, NEND, and NINC are ignored and forces are deleted on all selected nodes

  3. ACEL, ACC_X, ACC_Y, ACC_Z: Specifies the linear acceleration of body.

    • ACC_X: the x - Linear acceleration

    • ACC_Y: the y - Linear acceleration

    • ACC_Z: the z - Linear acceleration

  4. OMEGA, VEL_RX, VEL_RY, VEL_RZ: Specifies the rotational velocity of body

    • VEL_RX: the x - Angular velocity

    • VEL_RY: the y - Angular velocity

    • VEL_RZ: the z - Angular velocity

  5. DOMEGA, ACC_RX, ACC_RY, ACC_RZ: Specifies the rotational acceleration of body

    • ACC_RX: the x - angular acceleration

    • ACC_RY: the y - angular acceleration

    • ACC_RZ: the z - angular acceleration

  6. F, NODE, Lab, VALUE: Specifies force loads at nodes.

    • NODE: Node ID according to the joint or force. The user can define Node ID using View Loads List.

    • Lab: FX, FY, or FZ (forces) and MX, MY, or MZ (moments).

    • VALUE: Force value.

  7. LSWRITE: writes load and load step option data to a file