20.6.1.9. Ramp
The Ramp block outputs a ramp signal by the following equations.
\({y}=\text{Initial Output} (t < \text{Start time})\)
\({y}= Slope \times (t -\text{Start time})+\text{Initial Output} (t \ge \text{Start time)}\)
- where,
- \(t\) is the simulation time.\(y\) is the output.
Dialog box
Parameter(s) |
Description |
Slope |
Enter the rate of change of ramp signal. |
Start time |
Enter the start time of ramp signal. |
Initial output |
Enter the initial value of ramp signal. |