41.1.3.2. Road Property File
Each tire model has the appropriate format of the rdf file for each parameter. The rdf file can be compatible or not although some data type is same. The type of the rdf file must be the supported type of each tire model. For more information, refer to each program’s manual.
41.1.3.2.1. UATire
![../_images/image03722.png](../_images/image03722.png)
If the user uses the rdf file in the UATire model, the creation method of GRoad from the geometry is recommended than the creation method by directly inputting values.
41.1.3.2.2. MFTire and SWIFTTire
Note
Moving Road option is supported for only Flat Road type. If the GRoad is not Flat Road type, the origin and orientation of GRoad (or Body to which GRoad belongs) are ignored when simulating. Therefore, origin and orientation of GRoad should be set to (0,0,0) because rendering view and analysis result may differ.
41.1.3.2.3. FTire
Type definition |
METHOD |
ROAD_TYPE |
Format comp. with TNO MF |
|
COSIN |
flat_road |
2D |
flat |
Same |
3D_SPLINE |
3D_SPLINE |
. |
Unique |
|
3D Patch |
3D |
TRUE_3D |
Unique |
|
bump_road |
2D |
sine_sweep |
Unique |
|
creat |
2D |
plank |
Same |
|
CRG Road |
2D |
flat |
Unique |
|
drum_road |
2D |
drum |
Different |
|
flat belt |
2D |
hydropulse |
Unique |
|
ftr road |
2D |
flat |
Unique |
|
function road |
2D |
function |
Unique |
|
hydro road |
2D |
hydraulic_test_rig |
Unique |
|
hydro rgr road |
2D |
hydropulse |
Unique |
|
hydro sweep road |
2D |
hydropulse_sweep |
Unique |
|
link road |
2D |
flat |
Unique |
|
moving table |
2D |
moving_table |
Unique |
|
obj road |
2D |
flat |
Unique |
|
polyline_road |
2D |
poly_line |
Same |
|
pot hole road |
2D |
pot_hole |
Unique |
|
ramp road |
2D |
ramp |
Unique |
|
rgr road |
2D |
flat |
Same |
|
roof road |
2D |
roof |
Unique |
|
sine_road |
2D |
sine |
Different |
|
sine sweep road |
2D |
sine_sweep |
Unique |
|
tilt table |
2D |
tilt_table |
Unique |
|
uneven(ISO) |
2D |
stochastic_uneven |
Unique |