36.2.4. Tensioner Guide
Click Geometry of Tensioner Guide in the Component Builder dialog box. And then the user can see the dialog box.
Ref Parametric Marker: Shows the reference parametric marker.
X,Y.Z: Defines a passing point of the guide based on Ground.InertiaMarker.
R: Defines a radius of the guide passing two points
Segments: Defines the number of segments in the guide.
Connector: If Property Type is RSDA or Beam, the use can modify the property by clicking Prop.
Depth: Defines a depth of the guide.
Thickness: Defines a thickness of the guide.
Property Type: Selects a connecter type between segments. Rigid, RSDA, and Beam type are supported. The user can modify properties of connector by clicking Prop.
Rigid: All guide segments are connected by fixed joints.
RSDA: All guide segments are connected by the revolute joints and rotational spring damper. For more information, refer to Rotational Spring Force supported as a Force entity.
Beam: All guide segments are connected by beam elements. For more information, refer to Beam Force supported as a Force entity.
Each Rendering: The selected mode can be displayed in Each Render mode.
TensionerGuide Supporting
This defines connector type between the guide and Ground. Also, a geometry to contact with a tensioner can be defined. The geometry is fixed to the tensioner guide.
Type
Rev
Bush
X,Y,Z
Angle
Prop
Shape