24.4.3. Roller Pair

The user can create Fixed Roller and Movable Roller at the same time by using this command.

../_images/image1009.png

Figure 24.42 Roller Pair

24.4.3.1. Modeling Option

The user can create the roller pair as follows.

  • Point, Radius, Direction, Radius

    • Point: Selects a point to define the center of the fixed roller group.

    • Radius: Defines a radius of the fixed roller group.

    • Direction: Defines the position of the movable roller group with respect to the fixed roller group.

    • Radius: Defines a radius of the movable roller group.

  • Point, Radius, Direction, Radius, Distance

    • Point: Selects a point to define the center of the fixed roller group.

    • Radius: Defines a radius of the fixed roller group.

    • Direction: Defines the position of the movable roller group with respect to the fixed roller group.

    • Radius: Defines a radius of the movable roller group.

    • Distance: Defines an initial gap between the fixed roller group and the movable roller group.

      ../_images/image09310.png

      Figure 24.43 Initial gap of Movable Roller