41.1.2.2. Result

The analysis results of GTire in the post-process exist in two categories. One is the information of the tire body and others are the information of the tire force. Each analysis result’s name is displayed to the name of GTire with the suffixes for the bodies and the forces. The data for the analysis results is located as follows.

  • GTIRE_NAME: GTire entity name in the model data

  • GTIRE_BODY_NAME = GTIRE_NAME + “Body” (ex: Gtire_FLGtireFLBody): Result name of the GTire body

  • GTIRE_FORCE_NAME = GTIRE_NAME + “Force” (ex: Gtire_FLGtireFLForce): Result name of the GTire force

    • Tire Body Results
      Location: MODEL_NAME/Bodies/GTIRE_BODY_NAME
      All result data is same with the general body output.
      ../_images/image01626.png
    • Tire Force Results
      Location: MODEL_NAME/Tire/GTIRE_BODY_NAME
      ../_images/image01723.png ../_images/image01823.png

  • FM_Tire to TZ_tire (6): Six components of tire force reported in the tire body’s local coordinate. These results are for the force display.

  • FxW_Longitudinal to TzW_Self_Aligning (6): Six components of tire force reported in the ISO tire’s coordinate.

  • Longitudinal_Slip_Ratio to Rolling Radius (6): Physical state of the tire. For more information, refer to Tire Kinematics.

  • Vel_Contact_Point_Forward to Vel_Compression (4): Velocity state of the tire contact point. For more information, refer to Tire Kinematics.