6.1.4.3.10. Offset Surface
It allows the user to create surfaces at a certain distance from the selected surface.
6.1.4.3.10.1. Modeling Options
The user can create a surface geometry by the following procedure.
Sheet, WithDialog
Sheet: Selects a surface.
WithDialog: After selecting a surface, Offset Surface dialog box is shown. The surface is created by clicking OK in the Offset Surface dialog box.
Entity Name: Shows the name of the selected entity.
Color: Specifies the color of the surface to be created.
Offset: Defines a distance from the selected surface.
Preview: Previews the surface to be created on Working Window.
Update: Updates the preview.
WithDialog
WithDialog: Offset dialog box is shown. The surface is created by clicking OK in the Offset dialog box.
Color: Specifies the color of the surface to be created.
Offset: Defines a distance from the selected surface.
Add/Remove: Selects several faces of any geometries the user wants to add or remove.
Add/Remove (Continuous): When using Add/Remove, if this option is checked, the connected faces within the degrees are selected together.
Tolerance (Degrees): The angle between the connected two faces.
Preview: Previews the surface to be created on Working Window.
Update: Updates the preview.