28.3.3. CAD Double Flange

The basic parameters of CAD double flange are same to the basic parameters of Double Flange provided in Track_LM Toolkit. But, the user should construct a side contact between the Track Link and the CAD double flange. The following steps explain how to create a user-defined CAD double flange.

Step to Create a CAD Double Flange

  1. Import or create a user-defined CAD double flange geometry.

  2. Click the CAD Double icon of the Flange group in the Track (LM) tab

    • Solid: Selects a desired solid body. (The geometry reference frame of the desired solid must be on the Inertia Marker. Refer to Preparing for CAD Track Entity)

    • Point: Selects a point where the CAD Double Flange is created.

  3. Define a contact surface for the side contact with the Track Link after creating the CAD Double Flange.

    ../_images/image11415.png

    1. Enter in Body Edit mode.

    2. Create surfaces by using Face Surface. The user can also use other generating surface tools (importing a surface geometry etc…).

    3. Define the contact surfaces in Side Contact page. Refer to Contact Page.

    4. Define the contact characteristic of the Side Contact. Refer to Characteristic Page of Contact.